AI Electrical Mentor

Ask better questions, learn cleaner habits.

A guided mentor bench for safe explanations, fault-finding prompts, quiz practice, and better measurement habits.

Safety first, always.

ElectroLab AI teaches theory, low-voltage electronics, and planning concepts. Mains voltage, switchboards, fixed wiring, high-current systems, and legal electrical work must only be performed by licensed electricians where required.

Open Safety Center

Build the question before the answer.

Pick a scenario, choose explain/check/fault/quiz mode, add your observation, and the mentor drafts a safe measurement path plus a future-AI-ready prompt.

Need a next measurement?

Troubleshooting Coach turns symptoms and observations into a safe low-voltage probe path.

Open Troubleshooting Coach

Mentor workspace

Build a safer, sharper question.

Draft your own question or observation

Source

Battery or 3.3 V/5 V logic output

Proof checks

5 checks to clear before confidence.

Mode

Turn the topic into plain apprentice language.

Mentor response draft

A safe path you can act on.

Scenario: LED or resistor circuit Safety read: Low-voltage learning path This looks suitable for low-voltage theory, planning, or bench practice if you keep supplies current-limited and power down before rewiring. Mentor path: Explain Low-voltage LED, resistor, battery, breadboard, or GPIO indicator. by naming the source, the load, the control part, and what energy is doing. Then connect it to one bench measurement. Before you continue, prove these: 1. Supply voltage known 2. LED forward voltage estimated 3. Series resistor installed 4. Current target chosen Best first note to write down: source = Battery or 3.3 V/5 V logic output.